Eastwood 135 vs. Hobart 140 (Which One Is Better)

Eastwood 135 and Hobart 140 are welders that use MIG welders for welding sheet metal. The two welders run with a standard amount of volts which run up to almost 240V with the size of their casings, and they are lightweight since they weigh almost 60 kilograms. Using the welders is easy since you can connect them to any power supply since they are portable and can move from one place to another. They can also weld the same type of material that adds value to the materials. The materials they can weld include aluminum, mild and stainless steel.

 Choosing the best welders between the east wood and Hobart depends on the user’s preference on the amount of power and some other features the two welders have. The features are different, making them differ in their working process, their general appearance, and how to take care of them. However, the same features can be similar in each case, which brings similarity among the two welders. So Eastwood 135 and Hobart 140 have similarities and differences at the same time.

Therefore, the article covers all the similarities of the two welders and their differences.  If you wish to know the similarities and the differences, consider checking the guide below. The frequently asked questions in the guide are the questions that most people ask about the product. Let’s narrow it down to the main topic now.

Contents

Quick comparison table of Eastwood 135 and Hobart 140

comparisonEastwood 135Hobart 140
Control panelAllows one to choose the voltages.Specific voltages.
current135amps140 amps
TorchHas torchLacks torch
priceaffordableexpensive
warrantyThree years5, 3, and 1 year

Differences between Eastwood 135 and Hobart 140

1. Control panel

eastwood 135 vs hobart 140
source: https://weldguru.com/

The control panels are the key areas in the welding machine that you have to use when operating the machine. Eastwood 135 and Hobart 140   both have control panels that have conditions such that you must use gloves to use them and are important since they have marks that indicate how to use the machines.

The control panel with the two machines has everything that looks the same. The difference comes in where the Hobart 140 welder has a specific amount of voltages to set for operating the machine, while Eastwood 135 gives one a chance to choose the voltages at any point from minimum to maximum.

Another difference in the control panel is that the Hobart 140 welder has an overheating light that shows whether the machine is off as it will be hot. At the same time, the light indicates if the welder is cool that it shows the machine is ready for work. On the other hand, the Eastwood welder lacks this feature such that when you want to identify if it’s still hot or cold, you have to pull the trigger to test the degree of hotness or coldness.

2. Current

The current of the two machines differs since they consume different amounts of power when welding the metals. As their names suggest, the Hobart 140 welder uses 140 Amps, the highest, while Eastwood 135 uses 135 amps. The different amount of current is best for each of their uses since Hobart 140 with its amps is best for welding quarter the size of steel while Eastwood 135 can weld 0.18 inches of steel with support of the MIG.

3. Flashlight and ground clamp

Flashlight and ground clamp

In both cases, the machines must have clamps on them that have leads that bring the differences between the two welders. The differences come in where the leads differ in their lengths since the Hobart has 10 feet while the Eastwood has 8 feet.

Therefore the differences in the feet make a difference between the two machines. In addition to this, the ground clamps contain a braided wire that joins the jaws for proper electrical connection to the ground, which is only available with the East wood, while the Hobart 140 lacks the wire.

Furthermore, the Eastwood 135 has a flashlight that helps one recognize the parts within the machine easily and at any place without the need to purchase an external torch, while the Hobart 140 lacks the torch that the user must buy some parts the machine uses to provide light which you can only get in specific as it is hard to find them in any shop.

4. Price

  Hobart 140 is more expensive than the Eastwood 135; all this is because it offers a longer period for the warranty and that they have been working for long that they are sure of their products, but the question for the user is that how can one purchase a product because of its brand name and the warranty period with such a price? On the other hand, Eastwood 135 is reasonably priced as it can weld the mild and stainless steel without many costs. However, when welding the aluminum, you need to purchase the spool gun that only increases the cost, unlike the Hobart 140, which has fewer features but is still expensive.

5. Warranty

Warranty

Hobart 140 offers a warranty of 5 years, three years, and maybe 1year. The five-year warranty offers free charges on the parts, costs for repairing the transformer, three years for repairing some wires within the system, control areas, and the regulator, while the rest of 1 year is for the MIG gun, contractors, and relays.

On the other hand, the Eastwood 135 offers a warranty of about three years for working with the machine’s materials, labor, and other defects. However, in this case, some parts cannot work with the warranty, like the cables and some wires. Therefore, if the warranty period feels okay with you, choose to use Hobart 140 as it offers a longer warranty period.

Similarities of Hobart 140 and Eastwood 135

Similarities of Hobart 140 and Eastwood 135
  • Function

Since both the machines are for welding, they can perform the same function, such they can weld mild, stainless steel, and aluminum. But for the case of aluminum with the Eastwood 135, you must purchase the spool gun for welding the aluminum.

  • Features

 The Hobart 140 and Eastwood 135 have a torch and ground clamp to enhance easy visibility; they have a control panel for easy control of the activities within the machine. These factors make the machines easy for the process of welding the metal sheets in an industry.

  • Warranty

The two welding machines have warranty periods depending on the manufacturer, but the similar thing is that they have warranties that you can do the repairs and replacements of some parts within the machine for free within those days. The warranty period of Hobart 140 is indifferent years depending on the actions, which are from 5 years, three years, and one year, while the warranty period for the Eastwood 135 is infinite as it is three years only.

  • Input voltage

The input voltage of both the Hobart 140 and Eastwood 135 is from a minimum amount of 110v to a maximum of 220V for it to work perfectly.

  • Ratings

Both two welding machines have high ratings since most people recommend using them for welding purposes. All because they weld both the aluminum and the steel metal sheets in an industry.

Frequently asked questions:

  • What are the advantages of Eastwood 135 and the Hobart 140?

 Both the two welding machines have advantages when using them that are different. The advantages of Eastwood 135 are that it has a stagnant voltage amount that helps to control the amount of heat in the machine, it has a space for a spool gun that enables it to weld even the aluminum metal sheet of 0.18 inches, has a torch that comes with it which helps to identify the parts within the machine at any time and any place, and lastly, it has a reasonable price that you can easily afford to purchase it for use in the industry.

The Hobart 140 has its advantages which include: the machine can weld up to a quarter-inch of metal sheet, has a good wire feed system that can weld longer inches of metal, can weld aluminum without the need of purchasing the spool gun, it is friendly with its users, has longer ground and torch leads that make it work over long distances and has a longer warranty period of up to 5 years.

Conclusion

 Eastwood 135 and Hobart 140 are both good welding machines that can weld god types of metal. But your choice depends on how you want to use it in your shop since they differ in their prices and so. When you want to have a cheap machine, consider using the Eastwood 135, but when you consider the warranty, choose to use the Hobart 140 as it has a longer warranty period. The article contains full information about the two welding machines, including the differences and similarities.

Therefore, consider following the article carefully to identify the best type of welding machine to use. Hobart is expensive because of its name and you can choose it for its brand name and security. Otherwise, both are good for use and can work better.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top